Chat with us, powered by LiveChat
tplinkwifi.net | www.tplinkwifi.net

TP-Link which provides various products to the society and with the customer satisfaction motto they keep their product satisfies almost all the customer’s needs. If we take an example of devices that provide by TP-Link are Cloud Camera, Smart Plugs, Smart Switches, Smart Bulbs, Range Extender, etc. With Proper range extender, you can expand the Wi-Fi Signal further to the place where you are not receiving any Wi-Fi. http://www.tplinkrepeater.net is the default web address to access the Extender setting from your computer or Laptop.

It is very interesting you to know that sometimes we can also try IP Address of your extender to login into your Management Page which is “http://192.168.0.254. With Proper installation, you can easily cover your dead spots at your Home or Workplace. TP-Link provides a different range of extender from a small house to a big house and from the small office to a big office. TP-Link nowadays provides Whole Home Wi-Fi which eliminates the extenders. You can connect your devices with an extended Wi-Fi network.

Why www.tplinkrepeater.net is important?

Well, http://www.tplinkrepeater.net is very important to access your extender’s settings, you can see the number of devices connected to your extender by login into your extender. You can also try the IP Address of your extender to login into the extender page. If you want to update the extender firmware, use the same TP-Link Extender Smart Account. Further, If you want to change the Wireless setting of your extender, make sure you can use the default web address for your extender. By access this page you can use the MAC Filter functions, access control features inbuilt in the extender.

TP-Link Repeater
WPS Push Button

How to set up a Range Extender?

TP-Link Extender setup is easy and there are two methods through which you set up the TP-Link Range Extender. Use the following steps to set up Extender:

METHOD 01:

  1. Make sure you can plug in the extender to the power source.
  2. Check out the color of the power light that needs to be stable.
  3. Side, you need to check the Primary Home Network, make sure it should be on and Wi-Fi is also on.
  4. You need to know of the Wireless password of your Router so that your extender will connect with your router.

STEPS:

  • You can turn on your computer or laptop and you can use an ethernet cable or Wi-Fi connection to your device.
  • You can see the Wi-Fi list on your computer where you can see the TP-Link Extender Network name is there in the List which would be with the name of the extender’s network: TP-LINK_Extender_2.4GHz or TP-LINK_Extender_5GHz.
  • Extended Wi-Fi Network remains open until we set up the extender, once your computer connects to TP-Link extended Wi-Fi.
  • Launch a web browser and where you can enter the “http://www.tplinkrepeater.netor you can also try with the default IP Address for your TP-Link Extender which is http://192.168.0.254.
  • Where it asks for default login credentials, you can try default login “admin”.
  • Now you need to go for Quick Set up Guide or you can click on Scan.
  • It will scan the network nearby to your Extender and show you the list.
  • You can select your home network and type the password for it and click next,  where you see the name of the Extended Wi-Fi Network and Extended Wi-Fi Password.
  • After putting the details, you can click on the save and it will save the New Wireless settings.
  • You can see the Extended Wi-Fi name and try to connect your devices with your Extender’s Wi-Fi.

METHOD 02:

  1. By using a WPS (Wi-Fi Protected Setup) on your extender you can take your extender into a setup mode.
  2. Make sure you do have the WPS button available on your Home Network’s box.
  3. Your router should support the WPS.
  4. Press and hold the WPS button on your router or you can also press through login into your router’s page.
  5. For doing that you can type “http://tplinkrepeater.com” after putting the default login information.
  6. You can go to wireless, where you can select Wi-Fi Protected Setup (WPS). Further, you have two options:
    Push-button
    WPS Pin Setup

Recommended: Always go for the WPS Push button easy to use.

  1. Push the WPS button for 3 seconds on your Extender and then push the WPS button on your router for 3 seconds.
  2. WPS light is blinking on both devices and it will take 2 minutes to establish a connection between them.
  3. After login in your router page, you can go for attached devices or connected device, where you can see the IP address for your extender.
  4. When you type that IP address on your browser, you can see the login page of extender and you can access the settings
  5. Connect your devices with extended Wi-Fi and Extender is Set up.

How to log into the Web GUI of my Range Extender via IP address or a domain name?

Here we will guide you on how to get into Range Extender page:

  • Please plug in the ethernet cable into your extender and other ends of the cable into your computer or Laptop.

NOTE: It is recommended but unnecessary to use an ethernet connection to log into the Web GUI.

  • Launch a web browser where you can enter the default address for your extender tplinkrepeater.net or you can also try the default IP address “192.168.0.254”.
  • It will be prompt for username and password for your extender login, where you can use the default credential (admin). Then click enter to log in.
Network Connection details

STEP 4: After login into your extender page, it will show you the Quick Setup option from where you can start setting up.

If you did not see the web GUI page after trying the above steps, you can try the following steps:

  1. Click on Start on your computer, then go to the control panel.
  2. Select Network and Internet and go to Network and Sharing Center.
  3. Go to Local Area Connection and select details where you see the IPv4 address and IPv4 Default gateway (It needs to be 192.168.0.254).
  4. If the default gateway is not available there, In that case, you can go to Internet properties under Local Area connection.
  5. Go to Internet Protocol Version 4(TCP/IPv4). Make sure you need to check-mark “Obtain an IP address automatically” and “Obtain DNS server address automatically”.
  6. Still, if it is not showing you the default gateway. In that case, you can disable and Enable your Local area connection.
  7. Last, if you are not getting the default IP address for your Extender. You can reset the TP-Link Extender.
Wireless Range Extender

How to improve your Wireless speed or range for your Range Extender?

Through this article, you will see the recommended steps to improve speed or range of your Range Extender:

  • Choosing the best location.
  • Optimize Configuration of your Range Extender
  • Upgrade the device

Choosing the Best location: Antennas Should be the position for best place and Range: With the proper location of your range extender and antennas should be on a proper angle. Make sure there should be no barrier on your Wireless antennas and it should be diagonally on 45 degrees. Apart from that, if you are putting your extender in the center of your house that will cover your entire house.

Try to avoid the extrinsic Interference: You need to avoid physical interference in the wireless coverage. Wall and ceiling always reduce the strength of Wireless Signals. Keep your router away from Electromagnetic device, microwave, Monitors, electric motors, etc

Optimize Configuration of your Range Extender: Please login to your TP-Link Extender page by typing “http://www.tplinkrepeater.net” and you need to go to wireless settings. Further, you can change the Wireless Channel (the default value is auto) and we recommend you to select 1,6 or 11 to avoid high wireless interference. Out 14 channels lists, they know only 3 channels as for Non-overlapping.

Upgrade the device:

  • If you want to get the best performance from your range extender, you can upgrade the combination of Antennas, So it will enhance the wireless transmission.
  • You can also update the router by the latest version of firmware, you can log in into your router by default the IP address “192.168.0.254”. You can optimize the various bugs in your router.

How to check whether my range extender is using the same name with my router?

Through this article, you can check whether your extender is using the same name or different name. While setting up the extender you can also change the Extended Wi-Fi  Name and Password. Later on, you can also change the setting for Wireless on your extender by login into the management page “http://tplinkrepeater.net”.  We can take an example if we are using TP-Link with SSID Name TP-link_Router and under that when you connected to the range extender if you see the 1 network name shows you in your device that means your extender has same Wi-Fi Name and same Wi-Fi password which you are using on Home Network.

How do you manually change the Wi-Fi name and Password?

To change the wireless setting of your TP-Link range extender. You need to login to your Extender page.

  • Your Computer needs to plug into your extender network either by an ethernet cable or on Wi-Fi.
  • Open up the web browser where you can type the default IP address for your extender “192.168.0.254” or you can also try the default web address “http://tplinkrepeater.net” where it asks for a login password.
  • You can try the default login password (admin) or if you changed earlier make sure you need to type that password.
Login Screen of TP-Link
  • After login in your TP-Link Page, go to wireless, from where you can go to wireless settings. Under settings, you can see the Extended Wi-Fi name and Extended Wi-Fi password.
  • When you put the New Name and Password Click on Save.
  • We recommend it that, once you save the settings you need to reboot your extender.
  • Once it is back on, you can see the New Wi-Fi name on your wireless compatible device.

How to adjust Wi-Fi coverage of TP-Link Range Extender?

You can set up the Wi-Fi coverage according to your Area or the location where you want to set up the Extender.

If we take an example of RE450 Range Extender.

  1. You need to login into the Web GUI of the range extender, for that, you need to open up the default web address of TP-Link extender which is “www.tplinkrepeater.net” and after that, you need to enter the login credential for the extender.
  2. Go to Settings option from where you can go to the Advanced settings.
  3. Under Advanced settings, you need to go to the Wi-Fi Coverage.
  4. You can select the different options according to your needs, Max, Mid and Min.
  5. Click Save and reboot your extender.

How to control LEDs of TP-Link Range Extender?

The LED light shows the status of extender, you can access the LED by login into your extender.

NOTE: If you use your extender frequently in the Night-time, In that case, you can turn off the LED light of Extender.

  1. Log into your extender, by typing “www.tplinkrepeater.net” on your browser and once you get into your page.
  2. You need to go into Settings > System Tools.
  3. Under System tools, you can select LED Control.
  4. Select the Night Mode and you need to specify the LED Off Time field.
  5. In that specific time, the LED light will remain Off.
  6. You need to click on save and it has saved your setting in it.